Description
Eco line absorbent tubulars for hydrocarbons and oils and repel water. Absorption capacity: Each pillow absorbs 3.6 l. of oil.
Eco line absorbent tubulars for hydrocarbons and oils and repel water. Absorption capacity: Each pillow absorbs 3.6 l. of oil.Absorbent worms for the treatment of leaks and spills. Absorb oils and organic solvents without absorbing water.
They float in water immediately after being totally saturated.
When dealing with severe spills, they should be used in combination with ECO Absorbent Pads to minimize the dispersion of contaminants.
Each tubular absorbs 3.6 l. of liquid, thus reducing costs in absorbents and waste treatment.
ECO products are resistant to almost all chemical compounds.
ECO tubulars should not be used to absorb basic solutions, especially those with a pH greater than 13, or in oxidizing environments.
oxidizing environments. They can also be incinerated.
Composition of the Ecological line pillows:
Filling: Organic vegetable absorbent (90.8% of the total weight of the product).
Outer layer: Polypropylene with antistatic treatment and UV protection.
The Eco line is designed to minimize the risks associated with static electricity (uses organic plant absorbent + layer of organic plant (uses organic vegetable absorbent + polypropylene layer with antistatic treatment). antistatic treatment). Ideal for use in ATEX zones. In addition, they are resistant to UV radiation.
Tested by two of the most stringent and internationally recognized standards for spill absorption. with regard to oil spill absorption:
Application method:
To enclose, placing the tubulars around the spilled oil stain. To recover oily residues on the water surface in the sea, rivers, lakes or aquifers in general. Also of application in treatment plants, oil separators or tanks.
Ideal to limit spills or drips at the foot of machines, after accidental spills to prevent the spread of the spilled substance. Also used as barriers in small hydrocarbon spills on the water surface.
ECO products are resistant to almost all chemical compounds:
They should not be used to absorb basic solutions, especially those with a pH greater than 13, or in oxidizing environments.
Disposal/Precautions:
It must be disposed of in compliance with applicable legislation at all times. Please note that the nature of the absorbed liquid affects the properties of the absorbent material used.
