Absorbent Booms – Eco line – All types of liquids

Description

Absorbent booms eco line for hydrocarbons and oils and repel water. Absorption capacity: Each boom absorbs between 63 and 126 liters depending on the model.

Absorbent booms for containment of leaks and spills. Absorb oils and organic solvents without absorbing water. They float on water immediately after being fully saturated.
When dealing with severe spills, they should be used in combination with ECO Absorbent Pillows to minimize the dispersion of contaminants.

Marine absorbent booms to control spills in aquatic environments.

They absorb oils and organic solvents without absorbing water. They use the organic vegetable absorbent as an absorbent. The organic vegetable absorbent is a 100% natural product: it is an ecological (natural and renewable) and sustainable product.
Designed to contain and absorb spills in emergency situations in aquatic environments. They float in the water immediately after being fully saturated.
They can be joined with other booms through the use of a system of ropes, carabiners and rings. This system allows for the creation of long chains of booms (for effective spill containment) and facilitates the
effective spill containment) and facilitates the removal of water booms..

Absorption capacities:
3 m boom: absorbs 63 liters.
6 m boom: absorbs 126 liters.

ECO products are resistant to almost all chemical compounds.
ECO booms should not be used to absorb basic solutions, especially those with a pH greater than 13, or in oxidizing environments.
oxidizing environments. They can also be incinerated. For this case we have a range of absorbents for chemical products.

Composition of the Ecological line of booms:

Filling: Organic vegetable absorbent (96.1% of the total weight of the product).
Outer layer: Polypropylene with antistatic treatment and UV protection.
Net: Nylon.

The Eco line is designed to minimize the risks associated with static electricity (using organic vegetable absorbent + polypropylene layer with antistatic treatment). Ideal for use in ATEX zones. In addition, they are resistant to UV radiation. Tested by two of the most demanding and internationally recognized standards for oil spill absorption:

Application method:

To enclose, placing the tubulars around the spilled oil stain. To recover oily residues on the water surface in the sea, rivers, lakes or aquifers in general. Also of application in treatment plants, oil separators or tanks.

Ideal for limiting large spills, to prevent the spread of the spilled substance. Also used as booms in large hydrocarbon spills on the water surface.

ECO products are resistant to almost all chemical compounds:

They should not be used to absorb basic solutions, especially those with a pH greater than 13, or in oxidizing environments.

Disposal/Precautions:
It must be disposed of in compliance with applicable legislation at all times. Please note that the nature of the absorbed liquid affects the properties of the absorbent material used.